14 Results for the search " file":
Author: gerinlajoie.luc
Type: Model
Downloaded: 431 times
Date: 2012-11-23
Extra control of machines - IEEE AVR
Description:
The proposed AVR sub-circuit models consist of a few IEEE 421 standard exciter[1] and Power Systems Stabilizer and governor. Don't forget to click the require observed signals in the SM devi... see morece, see Observe and Mechanical Tabs (vd, vq, if, Pmss, Efss, Omega_1, etc.) In this file, many duos and trios combinations of:
Exciter:
- IEEEX1 (dc1),
- IEEEX2,
- IEEEX4,
- IEEET5,
- EXST1,
- EXST1A,
Stabilizer:
- PSS1A,
- PSS2B,
- PSS4B,
- Q type II (var control)
Governor:
- IEEEG0,
- IEEEG1,
- IEEEG3,
- DEGOV1
- GAST,
- TGOV1,
- TGOV5[1]
IEEE Std 421.5, Recommended Practice for Excitation System Models For Power System Stability Studies, 2005
Tag(s): Components
Author: AdminEMTP-RV
Type: Model
Downloaded: 319 times
Date: 2012-06-18
Line_Coupling
Description:
The following example demonstrates the coupling effect between 3 adjacent transmission lines.
The case study consists of the implementation of a third transmission line next to two existing... see more lines. The data of the geometrical configuration are entered in the DATA LINE module and are stored in the "line_couplin_CP.lin". The generated model was obtained using the CP option and are loaded to the CP m-phase module using the data included in the "line_coupling_CP_rv.csv" file. The results are very close to the measurements provided in "H.W. DOMMEL ET AL, CASE STUDIES FOR ELECTROMAGNETIC TRANSIENTS, P.1,1991".
Author: AdminEMTP-RV
Type: Model
Downloaded: 141 times
Date: 2012-06-18
Protection_Homopolaire_Evol
Description:
This case introduces a typical zero sequence relay tested in a MV network.
This is a contribution of Marc Petit from Supelec in France.
See the comments in the file.
Tag(s): Protection, Components
Author: AdminEMTP-RV
Type: Model
Downloaded: 130 times
Date: 2012-06-18
Sic_Test
Description:
Example of a 276 kV Sic arrester.
This is a contribution of Bob Wilson from WAPA in the USA.
This file can only be read by V 2.0.1 or higher.
This design introduces a test c... see moreircuit to evaluate different discharge voltages and the 60 Hz follow current of the Sic arrester.